Cozy MKIV – January 12, 2020

January 12, 2020
skycaptain

Four angle brackets for the safety harness anchor points were fabricated from 1/8″ x 1″ x 1″ 2024T3 extruded aluminum angle.

The brackets were cut out with a hack saw and then rounded with a bench grinder and any sharp edges filed away.


Three 1/4″ holes were drilled in each of the four brackets.

The brackets were cleaned and soaked in alodine.

This image has an empty alt attribute; its file name is image-1.png
https://www.beyondblue.shop/products?category=Aircraft+Parts