Archive for October, 2019

Hybrid Rocket Motor Delta – October 17, 2019

Oct 17 2019

The rocket motor body is mounted to a dual sliding rail system for upcoming ground tests. Here is a short video clip.…

Cozy MKIV – October 12, 2019

Oct 12 2019

The heat duct transition piece was cut at a 45 deg angle on the square end. The 1″ hole under the left…

Cozy MKIV – October 9, 2019

Oct 09 2019

Trimmed and sanded the transition piece then removed the inside foam and tape. Workshop temperature 24 deg C and humidity 55%. Mixed…

Cozy MKIV – October 7, 2019

Oct 07 2019

Workshop temperature was 24 deg C and the humidity was 58%. A batch of epoxy was mixed using 30g resin and 11g…

Cozy MKIV – October 5, 2019

Oct 05 2019

Trimmed and sanded the rough edges at the top back side of the seatback/shoulder support. Sanded a radius on the forward corner…

Cozy MKIV – October 2, 2019

Oct 02 2019

The foam edges around the plywood shoulder support inserts were beveled. Shop temperature 24 degC and humidity 60%. A batch of epoxy…