Archive for September, 2019

Citabria – September 17, 2019

Sep 17 2019

Here is a short video of today’s cross country flight from Peterborough (CYPQ) to the Haliburton/Stanhope Municipal Airport (CND4), along with a…

Cozy MKIV – September 16, 2019

Sep 16 2019

A foam template of the rear seat heat duct sides was made to fit between the front seatback and forward landing gear…

Cozy MKIV – September 12, 2019

Sep 12 2019

Note: The Cozy Chapter 8 parts list is missing the correct size nuts for the machine screws that hold down the canopy…

Cozy MKIV – September 11, 2019

Sep 11 2019

Used a #12 drill bit to drill 5 holes in each of the two canopy hinges to secure them to the top…

Cozy MKIV – September 10, 2019

Sep 10 2019

Sanded the bonding surfaces of the canopy hinges with 220 grit then sanded the bonding surfaces of the upper longeron with 36…

Cozy MKIV – September 8, 2019

Sep 08 2019

The canopy hinge locations were marked on the top right longeron then two 10″ pieces of MS20001-P6 hinge were cut. Assembly of…

Cozy MKIV – September 7, 2019

Sep 07 2019

Cut out the headrest pieces using a band saw. Shaped the shoulder braces including the 45 deg bevels so they fit with…

Citabria – September 5, 2019

Sep 05 2019

A short cross country trip today including the grass strip at Greenbank (CNP8) and lunch on the patio in Lindsay (CNF4). Contact…

Cozy MKIV – September 4, 2019

Sep 04 2019

The shoulder support braces were fit into position and temporarily held in place with nails. Next, the headrest pieces were glassed. Shop…

Cozy MKIV – September 2, 2019

Sep 02 2019

Cut out the shoulder braces for the front seatback and redoing the headrests.