Cozy Experimental Aircraft Update – April 28, 2019

April 28, 2019

In preparation for glassing the fuselage sides, and subsequent work inside the fuselage, I’ve built a rotisserie so I can rotate the fuselage on its axis.

The fuselage is supported by one bolt through the firewall (I will have to repair this hole later) and one bolt through F-22 where the nose gear tube will be installed later.

The bolt is installed at least two feet off the shop floor so that the fuselage sides can clear the floor.

I was able to fabricate the rotisserie from scrap wood that was used previously to aid in the fuselage fabrication and assembly.