Cozy Experimental Aircraft Update – December 24, 2017

December 24, 2017
skycaptain

Removed peel ply from the 2″ BID tape on the seat brace/heat duct joint.

Trimmed the fiberglass edges using a small hand saw.

Sanded the taped joint and vacuumed the assembly and work table.

Sanded the bottom of the heat duct flush with the lower fuselage longerons.

Temporarily clamped 2 x 4s across the bottom of the fuselage to ensure the bottom of the heat duct was level with the longerons.