Cozy Experimental Aircraft Update – June 10, 2017

June 10, 2017
skycaptain

Workshop temperature was 25 deg C and humidity was 52%.

A batch of epoxy was mixed using 128g resin and 49g hardner.

The 3 layers of UND cloth were wet out – both left and right sides.

The bulkhead was wet with epoxy in the locations where the UND cloth is applied.

A small batch of flox was mixed and applied to the joint between the upper and lower landing gear bulkhead to ensure a smooth transition for the 3-ply layups.

Electric scissors were used to cut out the layups.

Both layups were positioned on the bulkhead, waxpaper removed, and then covered with peel ply.