Archive for January, 2017

Cozy Experimental Aircraft Update – January 29, 2017

Jan 30 2017

Sanded the front seatback corners at the taped joints. Clamp bars removed from instrument panel and corners sanded where taped joints will…

Cozy Experimental Aircraft Update – January 22, 2017

Jan 22 2017

Shop temperature was 25 deg C and humidity was 42%. Epoxy was mixed and applied to the 8″ x 31″ layers (…

Cozy Experimental Aircraft Update – January 21, 2017

Jan 21 2017

The front seatback locations where it mates with the fuselage side were sanded and vacuumed. The seatback clamps were removed. A piece…

Citabria Update – January 15, 2017

Jan 15 2017

A good day to give the engine a run.

Cozy Experimental Aircraft Construction – January 14, 2017

Jan 14 2017

Workshop temperature was 25 deg C and humidity was 34%. Flox was mixed with 112g of resin and 42g hardner to be…

Cozy Experimental Aircraft Update – January 13, 2017

Jan 13 2017

Shop temperature was 24 deg C and the humidity was 39%. A small batch of flox was mixed and applied to each…

Cozy Experimental Aircraft Update – January 7, 2016

Jan 07 2017

Traced the triangular plywood piece,¬†onto the foam side of one of the seat braces and used a chisel to carefully remove the…

Cozy Experimental Aircraft Update – January 7, 2017

Jan 07 2017

Trial fit the fuel valve to the newly fabricated bracket. Trial fit the fuel valve and bracket assembly to the triangular plywood…

Cozy Experimental Aircraft Update – January 6, 2017

Jan 06 2017

Thanks to Jason for fabricating the fuel valve bracket ! He used type 1100 aluminum, cut the plate to size then used…

SpaceShipOne Model Rocket

Jan 04 2017

We are excited to have a SpaceShipOne model rocket and look forward to launching it at a STEM event in the near…