Cozy Update – April 24, 2016

April 24, 2016

Trimming the fuselage sides.



I used a coping saw and small hand saw with a hack saw blade to trim the left front fuselage side then the right front fuselage side. The front foam/fiberglass and longerons were both trimmed.


A carpenters square was clamped in place to avoid cutting inboard of the trim lines.  The fiberglass is hard on the cutting blades so I procured some additional dremel and hand saw blades.


A dremel cutter and the hand saw were used to start trimming the left rear of the fuselage. The foam/fiberglass was trimmed but the longerons are not to be cut.

20160424_133503 IMG_2846 IMG_2847